Precautions and points of glass separator extractor
Points for use of glass separator extractor.
1.After passing through the distributor each pipeline pressure drop should be the same as far as possible, that is, from the distributor outlet to the evaporator and then to the evaporator outlet of the pressure drop between the collection tube.
2.The distributor have pressure loss, in the choice of throttle valve should be considered comprehensively.
3.In order to avoid the influence of gravity, liquid dispenser should be installed vertically.
4.To avoid the generation of uneven turbulence, in the pipeline before entering the dispenser as far as possible without the use of bending.
Precautions.
1.Do not point the extractor tube at yourself or others.
2.Aspirate or release the liquid under the premise of ensuring safety.
3.Ensure to use Eppendorf original accessories.
4.Do not disassemble the case of the dispenser, except the authorized personnel of Eppendorf.
5.When using 25Ml and 50Ml dispenser tubes, make sure that the adapter is installed in place, the adapter is a wear-resistant part, if you find that the adapter is damaged or worn out, you need to replace the adapter with a new one.
6.Don't turn to the inline dispenser tube.
7.Avoid liquid penetration into the interior of the instrument. In case of liquid penetration, only Eppendorf AG's partner can decontaminate the internal parts.
8. Do not disassemble the instrument housing.
9. The glass dispenser must not be used for purposes not indicated in the operating instructions.
10. When dispensing chemical reagents, make sure that they are within the tolerance range of the material. Do not allow the dispenser to touch reagents that may be damaging to ABS, ASA, PBT, PC, POM and PPS. Dispenser tubes should not be used to aspirate reagents that may be damaging to materials such as PP, PE, and LCP.
1.After passing through the distributor each pipeline pressure drop should be the same as far as possible, that is, from the distributor outlet to the evaporator and then to the evaporator outlet of the pressure drop between the collection tube.
2.The distributor have pressure loss, in the choice of throttle valve should be considered comprehensively.
3.In order to avoid the influence of gravity, liquid dispenser should be installed vertically.
4.To avoid the generation of uneven turbulence, in the pipeline before entering the dispenser as far as possible without the use of bending.
Precautions.
1.Do not point the extractor tube at yourself or others.
2.Aspirate or release the liquid under the premise of ensuring safety.
3.Ensure to use Eppendorf original accessories.
4.Do not disassemble the case of the dispenser, except the authorized personnel of Eppendorf.
5.When using 25Ml and 50Ml dispenser tubes, make sure that the adapter is installed in place, the adapter is a wear-resistant part, if you find that the adapter is damaged or worn out, you need to replace the adapter with a new one.
6.Don't turn to the inline dispenser tube.
7.Avoid liquid penetration into the interior of the instrument. In case of liquid penetration, only Eppendorf AG's partner can decontaminate the internal parts.
8. Do not disassemble the instrument housing.
9. The glass dispenser must not be used for purposes not indicated in the operating instructions.
10. When dispensing chemical reagents, make sure that they are within the tolerance range of the material. Do not allow the dispenser to touch reagents that may be damaging to ABS, ASA, PBT, PC, POM and PPS. Dispenser tubes should not be used to aspirate reagents that may be damaging to materials such as PP, PE, and LCP.
.jpg)
