high speed rotary evaporator

Product Details Characteristics Parameter Message

Product Details

High speed rotary evaporators use stepless speed to make the glass rotating bottle constant rotation, the material in the bottle wall to form a large area of uniform film, and then through the intelligent constant temperature water bath heat the rotating bottle uniformly, high-speed evaporation under vacuum case, after the efficient glass condenser cooling, the solvent vapor will recycle in the collection bottle.

Characteristics

The main bracket is made of stainless steel and aluminum alloy with reasonable structure and materials. Microprocessor-based power switch control.

All glass components are borosilicate glass (GG-17), high temperature, anti-corrosion. Anti-dry function, the heating pot lower than the heating pipe, the machine will automatically power off.

Sealing system adopts imported fluorine rubber and Teflon two-way combination seal, long corrosion-resistant life, to maintain a high degree of vacuum.

Over-temperature protection function, when the actual temperature exceeds the set temperature of 5 ℃, the machine will automatically power-off heating.

Upright three-layer serpentine coil condenser, main cooler + double cooler, ensuring high recovery. Vacuum gauges show real-time vacuum, oil-based table with anti-vibration characteristics.

Continuous feeding for customer's convenience, valve type feeding valve socket PTFE tube.

Collecting bottles are equipped with dropping materials to facilitate the collection and discharge of evaporated extracts.

Check valve control, continuous discharge, the machine in working condition, the vacuum switch. Over-temperature protection function, when the actual temperature exceeds the set temperature of 5 ℃, the machine will automatically power-off heating.

All valves use the latest integrated hand wheel valve, sealing is good, the operation is more simple and convenient.

.LCD full screen display, temperature, speed dual digital display, bath thermostat intelligent control, PT100-type sensor, quickly and accurately transfer temperature.

Brushless DC motor, stable rotation, no spark, slow down by force. The pot is made of high-quality 304 stainless steel, corrosion-resistant and durable. The outer layer of the pot is covered with a silicone layer, which makes it safer to use at high temperature.

Bath electric lift, lift part of the deceleration by force motor, lifting process more stable. .If there is a sudden power failure while the machine is working, the machine will stop heating automatically when the power is turned on again.

Tags:

Electric lifting rotary evaporator distillation

Parameter

Model	CE-1005
Voltage/Frequency	220V 50Hz/110V 60Hz
Total Power	2100W
Rotary motor power	60W1/5
Lifting motor power	40W1/12.5
Heating power	2000W
Vacuum degree	0.095Mpa
Rotary flask volume	5LΦ230mm/Φ80 flange port
Collecting flask volume	3LΦ195mm/upper Φ50 flange port×Φ35 flange port×2 pcs×lower Φ50 flange port
Rotary speed	0-120rpm/min
Temperature control range	Room temperature-180℃
Temperature control accuracy	±1℃
Bath lifting stroke	140mm
Condenser dimension	Φ120×600H(mm) side Φ50 flange port×lower Φ50 flange port
Condensing area	0.5 square meter
Gas cylinder	Left Φ35 flange port, side Φ50 flange port, rightΦ50 flange port
Material feeding valve	Φ35 flange port, glass+PTFE valve, material feeding valve(pagoda joint) with 12mm outer diameter
Releasing valve	Φ35 flange port×2, glass+PTFE valve, releasing valve(pagoda joint)with 12mm outer diameter
Material discharging valve	Φ50 flange port, side discharging valve (pagoda joint)with 20mm outer diameter, 260mm from the ground
Vacuum nozzle	Pagoda joint with 10mm outer diameter
In and out circulating nozzle of condenser coil	Pagoda joint with 16mm outer diameter
Bath dimension/weight	Φ295×175H(mm) about 12L
Overall dimension(WDH)	980×480×1260mm
Net weight	46KG
Packing dimension	800×450×1090mm wooden package 0.39 stere
Packing weight	68KG