Manual Rotary Evaporator

5L Manual Lifting Rotary Evaporator

Rotary evaporator is mainly used for enrichment, crystallization, drying, separation, drug, solvent recycling, bio~pharmaceutical industry etc.

Rotary flask volume

0-120rpm/min

Rotary speed

40W

Rotary motor power

Product Details Characteristics Parameter Message

Quote Now Send Email

Product Details

Rotary evaporator use stepless speed to make the glass rotating bottle constant rotation, the material in the bottle wall to form a large area of uniform film, and then through the intelligent constant temperature water bath heat the rotating bottle uniformly, high-speed evaporation under vacuum case, after the efficient glass condenser cooling, the solvent vapor will recycle in the collection bottle.

Characteristics

The parts in contact with the material are all made of high borosilicate glass (expansion coefficient 3.3) and PTFE materials, which have stable performance and are not easy to react with the materials.

The stent is made of cold plate anti-corrosive spray + aluminum alloy material, and the bath is made of 304 stainless steel.

The sealing system uses PTFE + fluororubber compound sealing. Over-temperature protection function, when the actual temperature> setting temperature+5 ℃, the machine will automatically power off.

Upright double-layer serpentine coil as condenser.

The piston-type feeding valve is sleeved with PTFE extension tube, which can be continuously fed to the evaporation flask under vacuum status.

Rotating and heating is controlled by power switch, which is a double-joint tilt button (ON-OFF).

Electronic stepless speed regulation, fine-adjustment by knob.

Thermostatic bath with temperature digital display function, Cu50 sensor + stainless steel probe at the bottom of the pot.

The lifting of bath controlled by handwheel.

Rotating and heating double fuses safety protection.

Vacuum pressure gauge shows real-time vacuum by pointer.

The collection bottle has a lower discharging port, equipped with cap type PTFE valve.

Tags:

Manual lifting rotary vacuum evaporator

Parameter

Model	ADM-501
Voltage/Frequency	220V 50Hz/110V 60Hz
Total Power	2040W
Rotary motor power	40W
Heating power	2000W
Vacuum	0.098Mpa
Rotary flask volume	5LΦ230mm/Φ50 flange port
Collecting flask volume	3L Φ195mm/upper 35#ball mill port, lower 3/4" adapter
Rotary speed	0-120rpm/min
Temperature control range	Room temperature-180℃
Temperature control accuracy	±1℃
Bath lifting stroke	200mm
Condenser dimension	Φ100×530H(mm) lower 35# ball mill stopper
Condensing area	0.26m2
Material feeding valve	19#standard plug valve, feeding valve (pagoda joint) with 10mm outer diameter
Vacuum nozzle	Pagoda joint with 10mm outer diameter
In and out circulating nozzle of condenser coil	Pagoda joint with 12mm outer diameter
Material discharging valve	Side discharging valve (pagoda joint) with 15mm outer diameter, 200mm from the ground
Bath dimension/weight	Φ280×170H(mm) about 10.4L 7.5KG
Overall dimension(WDH)	760×330×1030mm
Net weight	24.5KG
Packing dimension	990×620×470mm wooden package 0.29m³
Packing weight	41.5KG