Multiparameter Water Quality Meter

Product Details Characteristics Parameter Message

Product Details

Portable multiparameter water quality meter
Features
1.Color High contrast LCD touchscreen, 4.3 inches.
2.Intelligent operation system provides features including user management, calibration management, electrode management, method management, data management, Log Management and etc.
3.Multi-reading feature allows auto-read, timed-read and continuous-read.
4.Automatic/Manual temperature compensation ensures accurate results.
5.Auto-hold feature senses and locks the measurement endpoint.
6.Data capacity of up to 500 sets for each parameter (GLP-compliant).
7.Data analysis feature helps user review, compare and recalculate results.
8.Support for USB communication.
9.Auto-power off feature effectively extends the battery service life.
10.Reset feature automatically resumes all settings back to factory default options.
11.IP65 waterproof. The portable meter is suitable for fields measurements and out door measurements.

Accessories
1.E-301-QC 3 in 1 pH composite electrode
2.DJS-1VTC EC electrode
3.DO-958-Q polarographic DO electrode
4.NIST pH standard solution(4.01, 7.00, 10.01) ，50ml/vial
5.1413μS/cm EC standard solution, 50ml, 1 vial
6.Electrode holder
7.Silicone rubber case
8.Wristbands
9.Carrying Case
10.Touch pen

Characteristics

pH: 1-8 points calibration with Standard Recognition. Selectable pH buffer groups, including DIN, NIST, USA, MERK, JIS, GB. Support for pH standard group customization. Automatic electrode diagnosis with pH slope and offset display. User-defined pH buffer or buffer group is supported.

DO: Support for air-saturated water or zero oxygen calibration. Auto barometric pressure compensation. Manual Salinity Factor Correction. Selectable pressure unit, including kPa, mbar, Torr, Atm.

Conductivity: 1-5 points calibration automatically recognizes standard recognition. Settable parameters, including cell constant, reference temperature (5/10/15/18/20/25°C), temperature compensation coefficient and TDS factor. Temperature compensation type (none, linear, pure water).

Ion： 1-6 points calibration. Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, ppm, etc. Measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode. Over 10 methods are built-in, including F-, Cl-, Br-, I-, NO3-, BF4-, NH4+, K+, Na+, Ca2+, Cu2+, Pb2+, Ag+ and etc., user-defined method is supported.

Tags:

Portable multiparameter water quality meter

Parameter

Model		M510T
Parameters		pH/EC/ISE/DO/Temp. (mV/ORP/pX/Resistivity/TDS/Sal./DO Saturation)
pH	Range	-2.000 to 20.000 pH
	Resolution	0.1, 0.01,0.001 pH
	Accuracy	±0.002 pH
	Calibration Points	Up to 8
	Standard Customization	Yes
	Calibration Reminder	Yes
	Standard Recognition	MERK,JIS, NIST, GB, USA and DIN buffers
	Slope Limit	Yes
Mv/ORP	Range	-2000.0 to 2000.0 mV
	Resolution	0.1 0.01mV
	Accuracy	±0.1 mV or ±0.03%
	EH ORP Mode	Yes
	ORP Calibration Points	1 custom point (relative mV)
pX	Range	-2.000 to 20.000 pX
	Resolution	0.1, 0.01 ,0.001pX
	Accuracy	±0.002 pX
	Calibration Points	Up to 6
ISE	Range	1.000e-9 to 9.999e+9
	Units	mol/L, mmol/L, g/L, mg/L, μg/L, ppm, ppb
	Resolution	Up to 4 significant digits
	Accuracy	±0.3%
	Calibration Points	Up to 8
Conductivity	Range	0.000 μS/cm to 3000 mS/cm
	Resolution	0.001 μS/cm minimum, various with range selection
	Accuracy	±0.5% FS
	Reference Temperature	5,10,15,18,20, 25 ºC
	Calibration Points	Up to 5
	Calibration reminder	Yes
	Standard Recognition	10μS/cm, 84μS/cm, 500μS/cm, 1413μS/cm, 12.88mS/cm; 146.5μS/cm, 1408μS/cm, 12.85mS/cm, 111.3mS/cm
Resistivity	Range	5.00 Ω·cm~100.00 MΩ·cm
	Resolution	0.01Ω ·cm minimum,
	Accuracy	±0.5% FS
TDS	Range	0.0000 ppm~1000 ppt
	Resolution	0.001mg/L minimum, changed with range
	Accuracy	±0.5%FS
Salinity	Range	0.0~80.0 ppt
	Resolution	0.1ppt
	Accuracy	±1ppt
Dissolved Oxygen Concentration	Sensor Type	Polarographic
	Range	0.00 to 99.99ppm
	Resolution	0.01ppm
	Accuracy	（0.00~50.00）ppm，±0.10ppm （50.0~99.99）ppm，±0.50ppm
	Calibration Points	Air-saturated water or zero point
	Barometric Compensation	Yes
	Manual Salinity Factor Correction	Yes
Saturation	Range	(0.0 to 600.0)%
	Resolution	0.10%
	Accuracy	±2.0%
Temperature	Range	-10 to 135 ºC, 14.0 to 275 ºF
	Unit	ºC, ºF
	Resolution	0.1
	Relative Accuracy	±0.1ºC
Measurement	Reading Mode	Auto-Read (Fast, Medium, Slow), Timed, Continuous
	Reading Prompts	Reading, Stable, Locked
	Temp. Compensation	ATC, MTC
Data management	Data Storage	1000 Groups
Data management	GLP Features	Yes
Inputs	pH Electrode	BNC(Q9)
	DO with Temp. Probe	4-pin aviation connector
	Conductivity with Temp. Probe	5-pin aviation connector
Outputs	USB	PC, printer,USB 2.0 flash memory device
Display options	Backlight	Yes
	Auto Shutdown	300, 600, 1200, 1800, 3600sec., off
	IP Rating	IP65
	Date and Time	Yes
General	Power	Rechargeable Lithium battery, AC Adapter, 100-240V AC input, DC5V output
	Dimensions	90 x 255 x 40 mm
	Weight	500g (1.1 lb)
	Dimensions (Carton)	490×410×220 mm
	Weight (Gross)	5.5 kg

Message

M510T Portable Multiparameter Water Quality Meter